How sippy cup and bottle holder works

Directions for attaching the handle:

1)    Attach the handle of the sippy cup holder to an object (stroller, car seat, highchair, or anywhere
else you can loop the strap to). Place the strap tail through an opening on one of these objects.

2)    Slide the tail through the (2) D-rings and then bring the tail back between the D-rings. Pull tight to
secure.

To adjust the length of the handle:
1)    The handle can be adjusted to the desired length by sliding the white plastic slide(s) hardware up
or down. To shorten the handle, push the handle material up through the lower plastic slide and
through the upper plastic slide hardware.
2)    Holding the top of the handle with one hand and the bottom of the handle with the other hand, pull
until the material lays flat against the other. To lengthen, do the opposite.

Directions for Use:

1)    Hold the holder upright in your hand with the closure straps in the open position with the handle
facing upward.

2)    With your other hand, place a sippy cup or baby bottle inside with the spout facing you.

3)    Fold the right side of the upper closure snugly against the cup or bottle. Then fold the left side
smoothly against the soft side of the Velcro to adhere. Do the same with the lower closure.

4)    Attach a toy or pacifier to the plastic link or ring (included) to the loop located on the outside of the
holder.

For small sippy cups, simply slide the upper closure strap off completely and put away for safe
keeping. Only one closure strap is necessary when using your holder with small cups or bottles.



**Remember these holders are machine-washable and can be placed in the dryer.** Use a lingerie bag
to keep your holder separate from other washables if you like. This will prevent laundry lint from
attaching to the Velcro and also helps prevent the holder from sticking to other washables. Close the
Velcro closures before washing.